Showing 1–10 of 14 results

Canoe Seat Yoke

$110.00

The product that started it all, the Canoe Seat/Yoke was our first manufactured aluminum product. Designed to easily flip from canoe seat to canoe yoke in seconds. Our pads are made to absorb the shock of carrying a heavy load across a portage as well as comfort while on long paddles across the water.

  • Holds up to 300 pounds
  • Easily adjustable pads to fit various shoulder sizes
  • Made from strong anodized aluminum
  • Several pad colors offered
  • Frame telescopes to fit different widths.

One Tuff Truck Rack

$350.00$450.00
Rated 4.00 out of 5

Spring Creek Manufacturing offers one of the most versatile clamp/bolt on truck racks on the market. Made from strong, durable high grade aluminum the racks are made to last. From lumber, ladders, canoes or kayaks, your hauling needs are covered. Rack includes two strong aluminum legs that can adjust from 24”-34” in height. Plus, 65” non marking rubber top crossbar slides. Add our telescoping loading bars for easier loading and wider carrying ability. Up to 20″ of added width on each side with loading bars fully extended. Loading bars extend and adjust to various widths to fit many requirements.

•Lightweight yet extremely strong and durable aluminum.
•Rust resistant.
•Weight capacity up to 650lbs
•One-time installation

Price is for one rack only.

*Rack Pictured has loading bars*

Will NOT work on Dodge Trucks with the built in tool boxes

Suction Cup Rack

$225.00$325.00
Rated 5.00 out of 5

Spring Creek Manufacturing’s Suction Cup Rack. Price is for ONE RACK.

These universal roof racks do not require any special clips, bolts, or clamps for your vehicle. Included are our through cab straps and handle straps for your desired strapping needs. The straps thread through your open doors.

The suction cup mounts protect your roof from scratches or dents. The tops of the racks are padded to protect whatever you may be hauling. The racks are made from anodized aluminum and stainless steel, so they will not rust. Wide enough for canoes, kayaks, sailboats, ladders, lumber etc.

Add our telescoping loading bars for easier loading and wider carrying ability. Up to 20″ of added width on each side with loading bars fully extended. Loading bars extend and adjust to various widths to fit many requirements.

Suction Cup Racks are rated for 300 lbs, although your car’s roof may have a lower load limit.

Racks come in two sizes, 53″ for cars and thinner SUVs and 65″ for Trucks and bigger vehicles.

The top rack bar is 2-3/16″ wide and 1- 1/2″ high.

Through Straps and Handle Straps included.

Please specify 53″ for smaller vehicles or 65″ for full sized vehicles.

*Rack Pictured has loading bars*

Double Hitch Rack

$250.00

An exclusive Spring Creek design.

All aluminum, this handy rack telescopes vertically up to the largest pickup height.

Approximately 68″. 36″ long horizontal bar is padded and comes with extension bars that will extend out approximately 20″.

 

Load Stops

$50.00

These sturdy little stops clamp on easily to our Spring Creek Rack. Use them to hold your loads from shifting. Can be used on, Spring Creek’s Hitch Rack, Suction Cup Rack, Yakima, Barrecrafters or Thule Racks. Each order gets you 2 Load Stops. Approximately

3″ high and 4″ wide. Set of 2.

Canoe/Kayak Portage Cart

$250.00$275.00

The Spring Creek Manufacturing Portage Cart is made from durable lightweight aluminum and stainless steel with vinyl covered supports.

Portage Carts come with your choice of 12″ or 16″ Inflatable Wheels. It is recommended that the 12″ Wheels be used on smooth paths. For rougher terrain we recommend 16″ Wheels.

The Spring Creek Portage Cart is extremely well made for years of easy portaging. The Portage Cart quickly assembles and disassembles for compact storage. Wheels fold in like an airplane’s. The No-Axle design gives you high ground clearance. The telescoping handle acts as a kickstand support. The Bunks adjust to any distance spacing along the 30″ wide top bar.

It is designed to be towed by a person while holding onto the end of your canoe or kayak.

The wheels should ideally be placed a third of the way from the back of your canoe or kayak to balance your load and for easier rolling.

The cart comes with 7′ long tie-down straps.

Can carry 1 canoe or kayak.

12″ cart weighs only 16 lbs and 16″ cart weighs 25 lbs.

Load Limit 250 lbs.

Clamp On Transducer

$40.00

It has telescoping verticals that clamp to your canoe with a plate to attach your transducer. Self tapping screws included.

Drop-In Seat

$110.00

The name says it all, Spring Creek Manufacturing’s drop-in seat sets right into your canoe and easily clamps onto the gunwale. Can adjusts from 32” to 38” in width and is perfect for solo canoeing or adding a third passenger. Seat removes in seconds. Please specify canoe width in order notes before checking out.

  • Strong aluminum frame
  • Holds up to 300 pounds
  • Seat is made out of strong EthafoamTM

Garage Storage Rack – No Blocks

$100.00

Attaches to your garage or storage shed and folds up flush against the building when not in use. Can hold up to 110 pounds. Rack horizontal length is 36″. Vertical length is 12″.

We can shorten the length for a $5 fee.

Price is for a set of racks. 4 lag bolts and washers.

Holds one canoe or two kayaks on their side.

Positioning your canoe on the racks towards the points enables a wider canoe to be stored easily.

Aluminum.

Kayak Saddles

$150.00

Use our Kayak Saddles to hold your kayak firmly in place on your rack.

When you tighten the staps, these slightly flexible saddles will conform exactly to your kayak shape providing more support than other saddles. The saddle surface has raised edges to clean off the kayak and aid sliding on .

Made of UV resistant rubber-like material, we recommend using a UV protectant to keep the material flexible and aid in loading.

The clamp on base is designed to fit our Tuff Truck Rack, but will also fit any round or rectangular rack – including factory racks.

Set includes 4 saddles, to carry one Kayak.